Verila Li Complex EP 2 V420 LLS
Heavy Duty - High Temperature - Extreme Pressure - Long Life - Lithium Complex Grease
Verila Li Complex EP 2 V420 LLS is heavy duty, high temperature, long life lubricating grease based on lithium complex thickener and a high viscosity blend of mineral base oils and synthetic components. The lithium complex thickener makes the product suitable for high temperature applications. The product is formulated with the latest high-tech additives, delivering to grease the right balance of performance characteristics. Very good oxidation stability, rust and corrosion prevention, superior AW/EP performance as well as excellent water resistance, extend bearing life and provide reliable protection to the equipment in toughest operating conditions.
- Excellent at High Temperatures, for operating temperatures of up to 150 degrees Celsius.
- Very Good Mechanical Stability, resistant to softening.
- Excellent Anti-Wear & High Load Carrying Capacity thus protecting equipment exposed to heavy loads.
- Excellent Oxidation Stability will prolong grease life.
- Excellent Resistance against wash-out offer protection in the presence of severe water contamination.
- Superior Rust and Corrosion Protection, less maintenance.
Heavy Duty Grease recommended for lubrication of: heavily loaded bearings in wooden pellet production presses; equipment used in extremely loaded industrial applications such as steel, paper & cement industry, mining & quarrying, agriculture & forestry, construction equipment.
| Grease Classifications | ||
|---|---|---|
| ISO 6743-9 L-XBDHB 2 ⋅ DIN 51502 KP2N-20 | ||
| Test Parameter | Test Method | Value |
|
Appearance |
Visual |
Smooth and Homogenous |
|
Color |
Visual |
Yellow-to-Brown
|
|
Thickener |
Lithium Complex |
|
|
Base Oil Viscosity at 40 Celsius, mm2/s |
EN ISO 3104 |
420 |
|
NLGI Grade |
ASTM D217 |
2 |
|
Operating Temperature Range |
-20 to 150 Celsius |
|
|
Cone Penetration, Worked, 0.1 mm |
ISO 2137 |
265 – 295 |
|
Dropping Point |
ISO 6299 |
> 230 Celsius |
|
Rust Protection |
ASTM D1743 |
Pass |
|
Rust Test, EMCOR |
ISO 11007 |
0-0 |
|
Water Washout Test at 79 Celsius, wt.% loss |
ISO 11009 |
< 6 |
|
Four-Ball EP Test, Weld Point, N |
ASTM D2596 |
min 3150 |
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur