Verila CSX EP 1.5 VG460
Heavy Duty - High Temperature - Extreme Pressure - Calcium Sulfonate Complex Grease
Verila CSX EP 1.5 VG460 is a premium ultra-heavy-duty, Calcium Sulfonate Complex grease, for premium lubrication in steel factories, wooden pellet presses, heavy-duty off-road construction, industry, surface mining, deep mining, agriculture and forestry. The latest technology of Calcium Sulphonate Complex thickener and state-of-the-art additives make this grease deliver premium protection against wear. Your machinery will also be protected even when operating in wet or corrosive conditions, under super heavy loads, or there are vibrations. Use this grease for applications where the operating temperature is from minus 25°Celsius to +180°Celsius. Excellent Protection against rust.
Main Benefits:
- For operating temperatures up to 180oC
- Superior Mechanical Stability prevent from leakage
- Extremely High Load Carrying Capacity & Superior Anti-Wear performance, protecting equipment exposed to heavy loads
- Superior Resistance against wash-out, even in the presence of heavy water contamination
- Excellent Rust and Corrosion Protection
Recommended Applications:
- Especially for loaded bearings operating at elevated temperatures in the steel industry;
- Heavy-duty equipment used in mining, quarrying, agriculture, forestry/logging, cement, wooden pellet presses;
- Industrial; as well as automotive application
| Grease Classifications | ||
|---|---|---|
| ISO 6743-9 L-XBFHB 1,5 DIN 51502 KP1,5R-25 | ||
| Test Parameter | Test Method | Value |
| Appearance | Visual | Smooth and Homogenous |
| Color | Visual |
Brown
|
| Thickener | Calcium Sulfonate Complex | |
| Base Oil Viscosity at 40 Celsius, mm2/s | EN ISO 3104 | 460 |
| NLGI Grade | ASTM D217 | 1.5 |
| Operating Temperature Range | -25 to 180oC | |
| Cone Penetration, Worked, 0.1 mm | ISO 2137 | 280 – 310 |
| Dropping Point | ISO 6299 | > 305 |
| Rust Test, EMCOR | ISO 11007 | 0-0 |
| Water Washout Test at 79 Celsius, wt.% loss | ISO 11009 | 1% Typical |
| Four-Ball EP Test, Weld Point, N | ASTM D2596 | 5000 |
| Four-Ball Wear Test, Wear Scar, mm | ASTM D2266 | 0.45 Typical |
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur