Verila Li Complex EP 2 VG220
High Performance - Long Life - High Temperature - EP Lithium Complex Grease
Verila Li Complex EP 2 VG220 is High performance, High Temperature, Extreme Pressure [EP] lubricating grease based on lithium complex thickener and high-quality mineral base oils. It contains the latest high-tech additives which deliver to the grease the right balance of performance characteristics. Very good oxidation stability, rust and corrosion prevention, superior anti-wear [AW] and extreme pressure [EP] performance as well as excellent water resistance offer reliable protection to the equipment in tough operating conditions.
- Excellent at High Temperatures, even up to 150 degrees Celsius.
- Very Good Mechanical Stability prevents Leakage.
- Excellent Anti-Wear & High Load Carrying Capacity for equipment exposed to heavy loads.
- Excellent water wash-out resistance even in the presence of severe water contamination.
- Superior Rust and Corrosion Protection extends equipment life and reduce downtime and maintenance costs.
Multipurpose Grease for very wide range of Industrial and Automotive applications, such as construction, mining and agriculture equipment; heavy-duty on-road and off-road vehicles; industrial machinery and equipment installed in the cement, steel and paper industry. Typical Applications are: wheel Bearings, rolling element and slide bearings, joints and axles, chassis, pins and bushings
| Grease Classifications | ||
|---|---|---|
| ISO 6743-9 L-XBDIB 2 DIN 51502 KP2N-20 ASTM D4950 GC-LB | ||
| Test Parameter | Test Method | Value |
| Appearance | Visual | Smooth and Homogenous |
| Color | Visual |
Blue
|
| Thickener | Lithium Complex | |
| Base Oil Viscosity at 40 Celsius, mm2/s | EN ISO 3104 | 220 |
| NLGI Grade | ASTM D217 | 2 |
| Operating Temperature Range | -20 to 150 Celsius | |
| Cone Penetration, Worked, 0.1 mm | ISO 2137 | 265 – 295 |
| Dropping Point | ISO 6299 | > 260 Celsius |
| Corrosive Effects on Copper | ASTM D4048 | max 1 |
| Rust Test, EMCOR | ISO 11007 | 0-0 |
| Water Washout Test at 79 Celsius, wt.% loss | ISO 11009 | 8% Typical |
| Four-Ball EP Test, Weld Point, N | ASTM D2596 | min 3150 |
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur