Verila Li Complex EP 2 VG460 Ultra Moly

Heavy Duty - High Temperature - Lithium Complex Grease Containing Moly

Verila Li Complex EP 2 VG460 Ultra Moly is heavy duty grease based on lithium complex thickener and base oil blend of high viscosity. The grease contains perfectly balanced performance additives: antioxidants, rust and corrosion inhibitors and special EP/AW additives. The addition of very fine molybdenum disulfide and other dry lubricants provides extra protection against wear even under circumstances when the oil film brakes down.

  • Excellent at High Temperatures, up to 140 degrees Celsius.
  • Contains super-fine Moly. Provide extra protection against wear under shock loads and oscillating movements and even in the case of loss of grease and/or accidental overheating.
  • Very Good Mechanical Stability, resistant against softening.
  • Extremely High Anti-Wear & High Load Carrying Capacity, protecting equipment exposed to heavy and shock loads.
  • Excellent Resistance against water wash-out, even when exposed to severe water contamination.
  • Very good Rust and Corrosion Protection.

Designed for a wide range of heavy-duty applications: automotive, heavy-duty on-road and off-road vehicles in construction, agriculture and forestry; Chassis, CV-joints and Driveline Grease for Heavy Duty Equipment in Construction and Mining sectors; Preferred solution for lubrication of surface and underground mining and quarrying equipment: pins and bushings on buckets, loaders, shovels, crushers, and conveyors; Lubrication of large, slow moving and heavily loaded industrial rolling element bearings.

Grease Classifications
ISO 6743-9 L-XBDHB 2  DIN 51502 KPF2N-20
Test Parameter Test Method Value



Smooth and Homogenous



Grey to Black



Lithium Complex

Content of Dry Lubricants, %



Base Oil Viscosity at 40 Celsius, mm2/s

EN ISO 3104


NLGI Grade



Operating Temperature Range


-20 to 140 Celsius

Cone Penetration, Worked, 0.1 mm

ISO 2137

265 – 295

Dropping Point

ISO 6299

> 250 Celsius

Rust Protection

ASTM D1743


Rust Test, EMCOR

ISO 11007


Water Washout Test at 79 Celsius, wt.% loss

ISO 11009

6% Typical

Four-Ball EP Test, Weld Point, N

ASTM D2596

min 5000

While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur