Verila BENT EP 2 VG 460 Moly
High Temperature - Heavy Duty - Inorganic Thickener - Grease containing Moly
Verila BENT EP 2 VG460 Moly is an inorganic, bentonite thickened lubricating grease with moly. This grease is manufactured with the high viscosity base oil of ISO VG460. The inorganic thickener makes it suitable for applications at extremely high temperatures. The product has very good oxidation stability and good adhesive properties. It contains special additives which ensure rust, corrosion, extreme pressure and wear protection as well as molybdenum disulfide acting as a dry lubricant.
- Contains super fine Moly: excellent protection against wear and jamming even in the cases of accidental overheating or grease loss.
- Extremely High Temperature Range, up to 180 Celsius. This will not drip out and will stay in place to provide efficient lubrication and protection to the equipment and parts.
- Recommended where usage of other greases is limited below their melting point. Allows short time limited temperature peaks even up to 200 Celsius.
- High Load Carrying Capacity. Contain special extreme-pressure [EP] additives which enable it to withstand heavy and shock loads without failure of the lubricant film.
- Excellent Oxidation Stability will minimize grease degradation and formation of deposits.
Designed for heavy duty, high temperature, slow-moving industrial applications. Ideal for use in conveyer bearing, heat treating, metalworking autoclaves, kilns, tunnel ovens.Typical applications: plain sliding surface, journals and bearings.
| Grease Classifications | ||
|---|---|---|
| ISO 6743-9 L-XBFHB 2 × DIN 51502 KPF2R-20 | ||
| Test Parameter | Test Method | Value |
|
Appearance |
Visual |
Smooth and Buttery |
|
Color |
Visual |
Grey to Black
|
|
Thickener |
Inorganic |
|
|
Dry Lubricant |
Molybdenum Disulfide |
|
|
Base Oil Viscosity at 40ºC, mm2/s |
ISO 3104 |
460 |
|
NLGI Grade |
ASTM D217 |
2 |
| Operating Temperature Range | -20 to 180 Celsius | |
|
Cone Penetration, Worked, 0.1 mm |
ISO 2137 |
265 -295 |
|
Dropping Point |
ISO 6299 |
> 305 Celsius |
|
Corrosive Effects on Copper, 24h at 100 Celsius |
ASTM D4048 |
max 1 |
|
Four-Ball EP Test, Weld Point, N |
ASTM D2596 |
min 3150 |
While the information and figures given here are typical of current production and compliant with VERILA specification, minor variations may occur